Jensen Automobile Accessories BT380 User Manual

Bluetooth Handsfree

Car Kit with LCD

USER’S MANUAL

Model: BT380

Notes on Safety

1. Unit installation – Installing the BT380 Handsfree Car Kit requires specialized knowledge and skills. Incorrect

installation may cause damage to your BT380 unit and/ or your vehicle!! Therefore, it is strongly advised that the

system be installed by a qualified professional.

2. Installation location – Unsuitable installation locations may lead to incorrect functioning of the essential vehicle

safety equipments such as air bag or it may become a source of injury in an accident situation. Please always consult

the professional installer and carefully choose the installation location in the car.

3. Interference with on-board electronics – Incorrect installation or unsuitable installation locations may cause

interference with the vehicle electronics systems. Please read the vehicle manufacturer’s notes to this effect!

4. Road safety – We strongly advise that full attention is to be paid to the traffic conditions whenever the vehicle is

moving. Distraction of attention can lead to dangerous traffic situation. Even when using a handsfree car kit driver is

always advised to avoid phone call during difficult and complex traffic situation.

5. Use only approved replacement parts – Please always use official parts for your car kit as unknown spare or

replacement parts may lead to malfunctions.

Preface

This publication, including all photographs, illustrations and software, is

Neither this manual, nor any of the material contained herein, may be

reproduced without the express written consent of the manufacturer.

APRIL 2009

Trademarks

Other product names mentioned herein are used for identification

purposes only and may be trademarks and/or registered trademarks of

their respective companies.

Limitation of Liability

While reasonable efforts have been made to ensure the accuracy of this

manual, the manufacturer and distributor assume no liability resulting

from errors or omissions in this manual, or from the use of the

information contained herein.

1. Introduction

Carefully unpack the BT380 Bluetooth Handsfree Car Kit and check that the

following items are included:

n Identifying Components

Unpack the Car Kit package and ensure the following items are included.

Remote / Bracket / Clasp /

BT-380 LCD

Part # 31122450

Junction Box

Part # 31122100

CR2032 Battery

Part # 31122000

Stand

Part # 31122060

Speaker

Part # 31092430

Microphone

Part # 31092440

Power Cable

Part # 31102160

Fuse Set

Part # 31092010

Note:

If any item is missing or damaged, please contact your dealer.

2. Installation

This section demonstrates how to set up and install the BT380 into a vehicle.

n Installing the Junction Box

The Car Kit is designed to work with the 12/24-volt power supply of the

vehicle. Refer to the following to install the junction box in a vehicle.

1. Locate a suitable place inside the car to mount the junction box. Select a

dry place that avoids excessive heat and mechanical vibration. Ideally, the

junction box should be hidden from view, but still easily accessible.

Note:

Make sure that the cables are long enough to support the location of the

junction box. If the cables are not long enough, do not lengthen the cables.

Instead, relocate the junction box.

2. Use two screws (not included) to fasten the junction box in place.

2. Installation

o Connecting the Power Supply (For Options 1 and 2 only)

The following illustration demonstrates how to connect the Car Kit’s power

cables to the vehicle’s electrical system.

Important:

The blue cable must be connected to the 12/24V

switched to enable the Car Kit to go into standby

mode.

Do not connect the blue cable to the +12/24V

permanent. Doing so may discharge the battery of

the vehicle and prevent the Car Kit from being

reset.

2. Installation

p Connecting Accessories

The following illustration shows where to connect accessory devices.

Item

Description

The caller ID should be placed on the dash

within view of the driver and passenger.

(See Installing the Caller ID Display on

page 9.)

Caller ID

Ideally, the microphone should be located in

front of the user and above waist height.

Microphone

Speaker

For best reception, the speaker should be

mounted at least 80cm (30 inches) from the

Car Kit’s microphone.

2. Installation

q Preparing the Remote Control

The remote control is designed to attach to the inside of the steering wheel on

the left or right side.

Installing the battery

Before attaching the Remote control , install the supplied battery.

1. Remove the battery cover from the rear of the control module and remove

the old battery (if any).

2. Insert the new battery with the correct polarity as shown below.

3. Put the battery cover back on.

2. Installation

Attaching the remote control

Refer to the following to attach the remote control:

1. Attach the rubber clasp to the two notches on one side of the bracket

base.

2. Pull tightly on the rubber clasp and position the bracket base on the inside

of the steering wheel.

3. Wrap the rubber clasp tightly around the steering wheel and secure it on

the other two notches on the bracket base.

2. Installation

4. Cut off the excess rubber as close to the bracket base as you can.

5. Attach the bracket cover with the two supplied hex bolts.

6. Slide the remote control into the control bracket as shown. To remove the

remote control, push the release button to the right and remove the remote

control.

7. Now the remote is stabled and attached to the wheel.

2. Installation

r Installing the Caller ID Display

The caller ID is designed to sit on the dashboard once it is attached to the

stand. Remove the adhesive cover from the sticker pad (attached) from the

base and press firmly to secure in place.

If you wish to attach the LCD display elsewhere, such as next to the car radio,

detach the base from the stand by removing the screw as demonstrated.

Turn the stand inwards and apply a sticker pad (provided) to the back of the

stand. Position the stand and press firmly to secure in place.

2. Installation

s Installing the Microphone

Before installing the microphone, take note of the following:

Make sure that the cable can reach from the microphone to the junction

box. If the cable is too short, relocate the microphone. Do not lengthen the

cable.

The supplied microphone is uni-directional. For best results, place the

microphone in front of the person talking. We recommend on the A-Pillar. It

has a reception angle of 60 degrees, and is most effective within a 60-cm

radius.

Installing the Microphone

Find a suitable place for the microphone. Remove dust and grease from the

surface.

1. Remove the protective

cover from the Velcro and

press it firmly onto the

bottom of the microphone.

2. Remove the protective

cover from the other Velcro

pad and firmly press the

pad in place.

3. Attach the microphone.

3. Operation

n How to Operate the Car Kit

o Basic operation

Connecting to the Mobile Phone for the First Time

As soon as the ignition is turned on “BT380” text will be displayed on the

backlit screen and it will quickly enter the “Pairing” mode searching for

available Bluetooth mobile phones for pairing up. If the pairing screen does

not display automatically, you will need to turn on this function manually. See

Connection Settings on page 17.

Pa iring

BT380

You will need to switch on the mobile phone’s Bluetooth connection and

conduct a search for new Bluetooth audio device. At the end of the search

you should be able to see BT380’s name appearing on the mobile phone

screen.

3. Operation

Please select this item to pair and enter 1234 when prompted by the

password request. This will allow BT380’s device name to reside in the

mobile phone memory, listed along with other previously paired devices in the

handset.

You then need to press the connect command on the phone to establish the

connection with BT380 and your mobile phone name should appear on the

main idle screen.

You will also get battery and signal indications if your phone supports these

functions.

Note:

Please contact your dealer for a compatibility list.

p Dialing the First Call

Scroll up and down until the cursor is on Dial Number then press Enter to

display the menu. Scroll up and down to select your number. Press Enter to

accept the number.

1 2 3 4 5 6 7 8

0286655757

Dia l Number

Settings

Once you have finished selecting the telephone number, press the Answer

button to call the number you have just entered.

Receiving and Ending a Phone Call

When there is an incoming call, press the Answer button to accept the phone

call. To end a call, press the Reject/ End button to terminate the

conversation.

Adjusting the Conversation Volume

User can adjust the volume during the conversation by pressing the up and

down scroll button on the remote.

q Advanced Operation

Phonebook Functions 1 – Updating Phonebook

Phonebook

C a ll History

There are a number of ways to upload your phonebook to the BT380. If your

mobile phone supports automatic phonebook synchronization (for example,

3. Operation

Nokia 6230i), it will upload call history, phone book entries, and also sort the

phone book as soon as the phone is connected with the car kit.

Note:

Phonebook synchronization and sorting time may differ depending on size of

phonebook list. This may affect the initial remote control response at start up.

In the event that you do not wish to upload automatically, you can disable this

function and upload the phonebook manually. To setup manual phonebook

upload, please follow the steps below:

Setting → Phonebook Sync → Enable/ Disable

See Other Settings on page 22 for more information.

Note:

Phonebook Sync default setting is enabled.

To upload the contacts manually from both phone memory and the SIM card,

please follow the steps below:

Phonebook → Upload Phonebook

Please note that automatic phonebook synchronization will add in new

contacts which you have entered into your mobile phone but it will not delete

the entries which have been removed from your phone. To update your

deletions (or additions), please use the Upload Phonebook function.

Na mes & Numbers

Uploa d Phonebook

Note:

Contacts are picked up in random order by the car kit, therefore, after all

entries have been uploaded, BT380 will perform the sorting function in the

background. If you access the phonebook before the sorting is completed,

you may see that some contacts are not displayed in right order (however,

first character will always be in order). This is normal and BT380 will continue

to sort the contacts until it is finished.

However, if your phone does not support automatic phonebook

synchronization (which also means you cannot use the upload phonebook

function) you will need to upload the required entries by sending them

manually from the mobile phone via Bluetooth. This is the object push

profile (OPP) method. To use the OPP method for uploading contacts please

use the following steps:

Phonebook → Receive Contact

Rec eive C onta c t

Ba c k

_{Download from Www.Somanuals.com. All Manuals Search And Download}1_.3

3. Operation

As soon as you select Receive Contact the BT380 temporarily disconnects

from your mobile phone to allow for the contact entry to be included into the

BT380’s memory. Select the entry required and go to the send option to

select send via Bluetooth. You can send multiple entries by repeating the

process. Once you have finished, push the Reject/End button to stop the

receiving contacts process and re-establish the Bluetooth link with the last

connected mobile phone.

Note:

Some phones support sending multiple contacts at one time using the OPP

method. It is recommended that no more than one hundred selections be sent

at a time.

Phonebook Functions 2 – Search for a Name to Call

After the phonebook is uploaded it will reside in the car kit’s memory. You can

search these entries to call by going through the A-Z index and selecting the

first character of the name to look up a particular entry. For instance, choose

W for William, in the Names & Numbers menu and it will list the names

starting with W. To choose the desired letter scroll up and down and press

Enter to go into the respective phonebook entry list.

Phonebook → Names & Numbers → ABCDEFGHIJKLMNOP

Erica

ABC DEFG HIJ

0286655757

Scroll up and down to the desired contact and press the Answer/Call button

to dial out.

Alternatively, press the Enter button in the idle screen to instantly access the

phonebook’s A-Z index.

Accessing Received, Dialed, and Missed Calls

BT380 can sync with your mobile phone’s call history. To access the

previously dialed calls please go through the following steps:

Call History → Calls Dialed

To access received calls

Call History → Calls Received

To access the missed calls:

Call History → Calls Missed

Dialing a Number

To dial a desired number please go to Dial Number and scroll up and down

to the number you wish to call, press Enter to select the number. Once you

3. Operation

have selected the telephone number, press the Answer button to call the

telephone number you have just entered.

1 2 3 4 5 6 7 8

0286655757

Dia l Number

Settings

Voice Tag Activation

User can use phone’s voice command function via the BT380:

Press the Reject/End button on remote control for more than 3 seconds and

when you hear the voice activation sound speak the name to the microphone

and wait for phone to dial. Please note for some phones users are required to

pre-record the voice tag and attach to the entry before using this function.

Initiating Private Calls

A privacy function is available in the BT380 car kit. The handsfree feature is

disabled when the privacy function is enabled allowing for the use of the

handset during the conversation.

To initiate the private call function, simultaneously press both scroll buttons

on the remote control during a call. Once activated, press the Answer button

once to return to handsfree.

r Connection Settings

Pairing Setup

The majority of the phones can connect with BT380 under the hands-free

profile as follows:

Settings → Bluetooth Setup → Pairing a Device → Pairing

Phone

It is possible that some phones do not support the hands-free profile but

instead offer a headset profile. In this case, you will need to setup the headset

pairing to connect the mobile phone with BT380 as follows:

Settings → Bluetooth Setup →Pairing a Device → Pairing

Headset

Disconnecting From the Current Phone

You can disconnect the phone from

NOKIA 6230I

the BT380’s menu:

Disc onn

Exit

Settings → Bluetooth Setup →

Active Device → Disconn

Viewing, Connecting, and Deleting (Previously Paired Phones)

You can re-establish a connection with a previously paired phone by entering

the paired phone lists:

_{Download from Www.Somanuals.com. All Manuals Search And Download}1_.5

3. Operation

Settings → Bluetooth Setup → Paired Devices

Note:

To re-establish a connection with a previously paired device, the current

pairing must be disabled first.

To re-establish a link please go to the desired device name and press

connecting to re-connect with the BT380:

Settings → Bluetooth Setup → Paired Devices

→ select a device (such as Sony Ericsson K800i)

→ Conn

Sony Eric sson K800i

Nokia 6230I

Sony Eric sson K800i

C onn Del Exit

To delete a pairing simply select the desired device name and scroll up and

down to Del and press Enter to confirm the deletion:

Settings → Bluetooth Setup → Paired Devices

→ select a device (such as Sony Ericsson K800i)

→ Del

s Language Settings

Language Settings

Depending on your region there are up to 10 languages built into the BT380

and the default language is English. To change to a different language simply

follow the following steps:

Settings → Language Setup → English

Available languages: English, Spanish, Portuguese, French, Italian, German,

Dutch, Norwegian, Danish, Swedish.

t Sound Settings

Adjusting the Speaker Volume

You can adjust the speaker volume to suit your required sound level:

Settings → Sound Setting → Volume Settings → + / -

Volume

Disabling and Enabling the Keytone

3. Operation

You can disable or enable the

BT380’s keytone:

Keytone Settings

Ena ble Exit

Settings → Sound Setting →

Keytone Settings → Enable/Disable

_{Download from Www.Somanuals.com. All Manuals Search And Download}1_.7

3. Operation

u Display Settings

Adjusting Display Contrast

You can adjust the contrast of the LCD display:

Settings → Display Setting → Contrast → + / -

C ontra st

Adjusting Display Brightness

You can adjust the backlight level of the LCD display:

Settings → Display Setting → Brightness →

+ / -

Brightness

Changing the Backlight Color

You can change the color of the backlight to suit your car’s interior. BT380

has 5 preset colors to choose from:

Settings → Display Setting → Screen Color → White

Available colors: Orange, Green, Blue, Red, User Defined

3. Operation

You can also self-define the backlight color by using the following:

Settings → Display Setting → Screen Color → User Defined

User Define

Enabling Screen Auto Off

You can enable or disable the backlight to go dim when the system idle time

is longer than 10 seconds:

Settings → Display Setting → Screen Auto Off

→ Enable/ Disable

Sc reen Auto Off

Ena ble

Exit

_{Download from Www.Somanuals.com. All Manuals Search And Download}1_.9

3. Operation

v Other Settings

Enabling and Disabling Automatic Phonebook Synchronization

You can setup to automatically upload your phonebook when a connection is

established:

Settings → Phonebook Sync → Enable/ Disable

Phonebook Sync

Ena ble

Exit

Finding Out About the Device

For information about the device, go to:

Settings → About Device

BT: V200B009

S/W V 2.5 AF

Bluetooth Version

Software Version

3. Operation

w Factory Settings Reset

BT380 allows you to master reset the car kit back to the original factory

settings. To master reset BT380 please press both Answer and Reject

buttons at the same time for few seconds until you hear a series of beeps

which indicate that car kit has been reset back to the original factory settings

and is also available for making a new pairing.

Warning:

If you reset the car kit, all phonebook entries and paired settings will be

erased.

Bluetooth Software Upgradeability

The BT380 has the ability to be upgraded to give you many years of use and to be

compatible with newer versions of phones. There is a complete manual that

explains the upgrade process available at WWW.JENSEN.COM. We do not

recommend entering this mode without first downloading the upgrade information

and reading it completely. It is possible to render your car kit in-operable if you do

not complete this process correctly. This would not be covered under warranty as it

would not be considered a defect.

About Devic e

Firmwa re Upda te

Disclaimer:

All brands, trademarks and names are the properties of their respective owners. They are solely used to

identify their respective products, and have no indication of affiliation or relationship.

_{Download from Www.Somanuals.com. All Manuals Search And Download}2_.1

3. Operation

Troubleshooting

Make sure the bluetooth

function on your phone is

enabled.

My mobile phone can’t make

a connection.

Make sure the car ignition is on.

If on and no power check

the fuses and wiring.

Reset the Car Kit and try again.

Turn your phone off and on

again,

and

try

the

proceedure for connection

once more.

If your phone is very new check

the support website for an

upgraded software version.

With some phones, adjusting

the volume before the call is

initaited will disconnect the

call. Wait until the call is

answered, then adjust the

volume.

When my mobile phone is

ringing and

adjust the

call is

volume,

the

disconnected.

Re-record voice tags using the

method described in “Notes

on using Voice Recognition”

above.

My phone doesn’t recognize

my voice tags for voice

recognition.

(Note: Not available on all

Close your windows while

using voice recognition.

phones.

phone’s user manual for

Check

your

availability.)

Speak clearly in the same

manner in which the voice

tag was recorded.

3. Operation

_{Download from Www.Somanuals.com. All Manuals Search And Download}2_.3

3. Operation

Infinite Peripherals Printer PP 55 User Manual
InFocus Pet Fence IN1110a User Manual
Ingersoll Rand Heat Pump 1875CXXXXXX User Manual
JAI Security Camera CV M50IR User Manual
JVC Projector DLA VS2000U User Manual
KitchenAid Cooktop KECC507RBB00 User Manual
Kobe Range Hoods Ventilation Hood CX1830GS 8 User Manual
Kolcraft Crib B17 R3 2 04 User Manual
Kompernass Battery Charger TLG 1750 A1 User Manual
Kramer Electronics Fan PT 5T User Manual