Kramer Electronics Music Mixer 2900 000313 Rev 4 User Manual |
KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
102xl
2-Channel Audio Mixer
P/N: 2900-000313 Rev 4
Contents
Figures
102xl – Contents
i
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:
Sierra Products.
Congratulations on purchasing your Kramer 102xl 2-Channel Audio Mixer, which
is ideal for the following typical applications:
ï‚·
ï‚·
Live stage and studio audio mixing
Presentation systems and press conferences
102xl - Introduction
1
2
Getting Started
We recommend that you:
ï‚·
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
ï‚·
Review the contents of this user manual
to check for up-to-date user manuals, application programs, and to check if
firmware upgrades are available (where appropriate).
i
2.1
Achieving the Best Performance
To achieve the best performance:
ï‚·
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
ï‚·
ï‚·
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
ï‚·
Position your Kramer 102xl away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
!
2
102xl - Getting Started
2.2
2.3
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
!
Warning: Use only the Kramer Electronics input power wall
adapter that is provided with the unit
Warning: Disconnect the power and unplug the unit from the wall
before installing
Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
102xl - Getting Started
3
3
Overview
The 102xl 2 Channel Audio Mixer is a high quality, low noise, 2-input mono
balanced audio standalone mixer that provides for 2 different levels on each input -
Mic level or line level as well as the selection of either a dynamic or phantom
microphone.
The 102xl includes:
ï‚·
ï‚·
Two XLR input connectors and one XLR output connector
A MASTER knob for adjusting the level of both input signals mixed into the
output, and two LEVEL knobs, for adjusting the levels of each input
separately
ï‚·
A 12 VDC power socket, which is ideal for field use. The unit generates
broadcast voltage level ±12V and +48V internally from the single
+12 VDC input
ï‚·
ï‚·
Two input level select switches for selecting the balanced level (MIC or
LINE)
Two switches for applying 48V phantom power
4
102xl - Overview
3.1
Defining the 102xl 2-Channel Audio Mixer
This section defines the 102xl.
Figure 1: 102xl 2-Channel Audio Mixer
#
1
2
Feature
Function
INPUT 1 XLR Female Connector
PHANTOM 48V (OFF/ON) Switches
Connects to the audio source 1
Move to ON to select a condenser microphone;
move to OFF to select dynamic microphone (1 and
2)
3
4
INPUT 2 XLR Female Connector
Connects to the audio source 2
INPUT LEVEL SELECT (LINE/MIC)
Switches
Move to MIC to select microphone level input;
move to LINE to select line level input (1 and 2)
5
6
7
8
9
12V DC
+12V DC connector for powering the unit
Lights when the unit is powered
ON LED
OUTPUT XLR Male Connector
INPUT Knobs
LEVEL
Connects to the audio acceptor
Adjust the input levels of each channel (1 and 2)
MASTER Knob
Adjusts the combined signals from both inputs
mixed to the output
102xl - Overview
5
4
Connecting the 102xl
Always switch off the power to each device before connecting it to your
102xl. After connecting your 102xl, connect its power and then switch
i
on the power to each device.
To connect up to two balanced audio sources to the 102xl 2 Channel Audio Mixer,
1. Connect a balanced audio source (for example, a condenser microphone) to
the INPUT 1 XLR female connector.
Set the INPUT LEVEL SELECT IN 1 switch to MIC.
Set the PHANTOM 48V IN 1 switch to ON.
When using a dynamic microphone, set the PHANTOM 48V switch to OFF.
2. Connect a balanced audio source to the INPUT 2 XLR female connector.
Set the INPUT LEVEL SELECT IN 2 switch to LINE.
Set the PHANTOM 48V IN 2 switch to OFF.
3. Connect the XLR male OUTPUT connector to a balanced audio acceptor (for
example, a power amplifier with speakers).
4. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
5. Rotate the INPUT 1, INPUT 2 and MASTER LEVEL knobs to adjust the
audio level of input 1, input 2 and of both inputs mixed together (the
MASTER LEVEL knob) to the output, respectively.
For every unused input, be sure to rotate the LEVEL potentiometer
fully counter-clockwise (to the minimum level).
i
6
102xl - Connecting the 102xl
5
Technical Specifications
INPUTS:
2 line/mic balanced mono on XLR (F) connectors
OUTPUT:
1 line balanced mono on an XLR (M) connector
18Vpp @absolute maximum gain
> 100kHz
MAX. OUTPUT LEVEL:
BANDWIDTH (-3dB):
S/N RATIO:
Line: 91.5dB Mic: 62.5dB, 1kHz
CONTROLS:
Line:<-48dB to +11.4dB, Mic: <-1.9dB to +62.5dB,
minimum to absolute gain
Phantom +48V selection for condenser microphone by
DIP-switches per input
Line/microphone input mode selection by DIP-switches per
input
COUPLING:
Input: AC, Output: DC
AUDIO THD + NOISE:
AUDIO 2nd HARMONIC:
POWER CONSUMPTION:
OPERATING TEMPERATURE:
STORAGE TEMPERATURE:
HUMIDITY:
Line: 0.013%, Mic: 0.079%
Line: 0.002%, Mic: 0.01%
12 VDC, 140mA
0° to +40°C (32° to 104°F)
-40° to +70°C (-40° to 158°F)
10% to 90%, RHL non-condensing
10.68cm x 16.2cm x 4.2cm (4.2" x 6.38" x 1.65"), W, D, H
0.65kg (1.4lbs) approx.
DIMENSIONS:
WEIGHT:
ACCESSORIES:
Power supply
OPTIONS:
RK-1 19" rack adapter
8
102xl - Technical Specifications
For the latest information on our products and a list of Kramer distributors,
visit our Web site where updates to this user manual may be found.
We welcome your questions, comments, and feedback.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
SAFETY WARNING
Disconnect the unit from the power
supply before opening and servicing
!
P/N:
Rev:
2900- 000313
4
|
Indesit Refrigerator SA300 I User Manual
Infinity Speaker System QPS1 User Manual
Invacare Mobility Aid Lightweight User Manual
Jet Tools Washer Dryer JHS 2200A User Manual
JVC Home Theater System TH C90 User Manual
JVC Stereo System UX QX3A User Manual
Kenmore Range 22 92208 User Manual
Kenwood CD Player CD 424M User Manual
KitchenAid Refrigerator KURO24RSBX01 User Manual
KitchenAid Ventilation Hood KAWL500W User Manual